Filter Type: All Time
Past 24 Hours
NetExtender NetExtender losing profile and not always working? Upgraded firmware on firewall. Uninstalled NetExtender and removed folders for NetExtender. Re-installed NetExtender and added configuration, restarted laptop. Upon 1st attempt to login and connect the server and domain (profile) are populated with correct information and user was able to
Category: Art, It Preview / Show details
Setup Netextender loses default connection profile, then won't connect after restart Posted by wrinks. it seems to be looking for always-on info and failing. I don't believe we have that setup, and if we do it's not caused this issue with us before, or with other users. -Both said Sonicwall configuration did not appear to be causing the
Client For that navigate to the SSL VPN-->Client Settings-->Configure-->Client settings page you can enable the "Create client connection Profile". My client doesn't have that screen. But I did find a workaround. During the install, tell it to only use the one connection you specify during the install and it remembers the server and domain forever.
Category: It Preview / Show details
Reboot If not, set them to automatic start, reboot the machine, and install NetExtender again. 3. Check if there is another dial-up connection in use. If so, disconnect the connection, reboot the machine and install NetExtender again. 4. If problem still exists, obtain the following information and send them to support:
Category: Art, Machine Preview / Show details
Always Aug 1st, 2014 at 3:11 AM. I noticed my net extender (7.5.214) is disconnecting always around lunch time, and I cannot reconnect straight away, I have to restart my windows 8.1 machine. after a few days of investigating I noticed I always plug my Samsung Galaxy 4 with WIFI on to the USB cable connected to my pc.
Disconnected I have been battling an issue with one remote user using NetExtender that randomly on some days will consistently get disconnected with the "Error, 0x06000308, Engine, NetExtender has been disconnected for one of the following reasons:" They are running 8.6.265 and no other users are running into these same issues.
Select Select F12 on the keyboard after login to the SonicWall, select on the Security and View certificate button. The certificate will then open to the General tab. Right click on the Lock and select on the arrow then More Information as shown below. Select on the View Certificate button then Details tab click Export and save to a location on the
Category: It, Security Preview / Show details
Timeout 1.Inactivity timeout will not work when 'Always On VPN' feature is enabled for NetExtender Connections. 2.Inactivity timeout applies to NetExtender Windows Clients only. 3.User timeout setting takes precedence over the group timeout and the group timeout takes precedence over the global timeout. CT with Device Guard is stuck on Identifying when
Connection To configure this, please follow the given steps: 1. Right click on NetExtender client Icon in the system tray and select "Preferences" option from the menu. 2. Choose the "Settings" tab. 3. Select the option “Automatically connect with Connection Profile” given under “When I start up my computer:” option. Choose the desired Connection
NetExtender Table 28: NetExtender Connection Entry Cannot Be Created: : Problem Solution NetExtender connection entry cannot be created. Navigate to Device Manager and check if the Dell SonicWALL SRA NetExtender Adapter has been installed successfully. If not, delete the adapter from the device list, reboot the machine and install NetExtender again.
Category: Dell, Machine Preview / Show details
Client SSL VPN->Client Settings, Edit your Device Profile, Client Settings tab. There will be a couple of options there, including client autoupdates, Create Client Connection Profile (which will save the server and domain), and User Name & Password Caching (to save the username and/or password). Of course, in general you don't want to allow the
NetExtender Then I have to connect to a Sonicwall NetExtender VPN to get into another environment. When I do this the NetExtender connection drops it connection about every ten minutes and then reconnects. When I am at the office the NetExtender does not drop the connection. At home I have a ATT Gateway > Ubiquiti Edge Router X > Ubiquiti ToughSwitch POE.
Category: Home, It Preview / Show details
Moving New to Sonicwall and VPNs in general. We are currently moving locations and I have a new static IP for the new site. The side of the VPN that is not moving location is an NSA2650 and the side that is changing locations is a TZ 400, both are on 6.5 firmware.
NetExtender To configure NetExtender profiles and preferences, including proxy servers, on your Android smartphone, perform the following steps: 1. To display NetExtender options, start NetExtender and then press the options or menu button on the smartphone. The options are displayed at the bottom of the screen.
Category: Art, Reference Preview / Show details
Script Finished confirming all VPN clients are up to date. The notice (linked below), if you scroll down to Resolution, says, " Download the script available in the MySonicWall portal under the download section for Global VPN Client and double click on the script file, which will safely remove the affected folders from the respective Windows clients.
NetExtender NetExtender Issue. I have a user that is running NetExtender and connecting via SSL VPN to the office. We have found that the client on the laptop will not stay connected. It connects then disconnects after a few minutes. I have uninstalled the version then went to an older version then moved to the latest version.
Category: It, Office Preview / Show details
Firmware If it does not have the latest version, upgrade the firmware to the latest. Usually if there is a new firmware available, there will be an alert for new firmware at the top to the extender GUI. Click on the alert to update the firmware. Figure 1: Firmware Update. Otherwise, click in Device Update page. Click “ Check ” to confirm if there is
: Check if there is another dial-up connection in use, if so, disconnect the connection and reboot the machine and connect NetExtender again. If problem still exists, obtain the following information and send them to support: The version of Dell SonicWALL SRA NetExtender Adapter from Device Manager.
In the Save profile drop-down menu, you can select: When NetExtender is connected, the NetExtender icon displays in the status bar at the top right of your display. To display NetExtender options, click the icon. To display a summary of your NetExtender session, click Connection Status.
Verify your account to enable IT peers to see that you are a professional. NetExtender (which I don't have installed right now) has a logging feature that you can read from within the application's UI, but isn't very helpful from my experience. To get a better idea of what's happening, I suggest starting at the Firewall itself.